SKU:
RXSOL-24-1905-125 Packing Sizes:
This product is γ-form white spheric active aluminium oxide, which is used for the recovery of sulfur from acidic gas containing sulfur by liquefaction in petrochemical industry. The product is prepared from intermediate raw materials of quick dehydration process production. It has the feature of high crushing strength, low adsorption rate, good activity, long period of service life, good physic-chemical properties and high catalytic activity etc. The performances of the product such as hydrolytic activity of claus, hydrolytic activity to organics sulfur, resistance to sulfation, heat stability and chemical composition can reach the level of CR- form aluminium oxide catalyst made by France.
This product is suitable for the sulfur recovery in the refined oil plant, natural gas plant, coal gas.
Product Application:
Product Dose:
Product Note:
Precautions:
1. In the operation process, prevent the bed layer of the reactor from high temperature, carbon deposition and sulfation, start or stop working carefully, so as to keep the high activity of catalyst and prolong the service life of catalyst.
2. The oxygen and sulfur dioxide content in the air flow entered into the reactor should be decreased as much as possible, so as to prevent the catalyst from sulfation poisoning. At normal operation H2S/SO2(molecular rate)should be about 2.
3. Under the air flow containing sulfur steam, the temperature in all part of the bed layer of the reactor should be less than the dew point of sulfur, so as to avoid the sulfur deposition on catalyst and plugging off the pipeline. Any wrong operation of raise temperature or drop temperature should be avoided.
4. Amines, hydrocarbons and ammonium etc. should be avoided into reactor, so as to prevent the catalyst from carbon deposition, plugging the pipeline and forming poisonous such as ammonium sulfate etc.
Product Technical Specification:
Specification :-
Particle Size mm |
AGC-I (4-6) | AGC-II (4-6 ) |
| Specific surface area m2/g | 200 min | 280-400min |
| Pore Volume cm3/g | 0.4min | 0.45min |
| Bulk Density g/cm2 | 0.65min | 0.72min |
| Crushing Strength N/sphere | 100min | 110min |
| Abrasion rate % | 0.5 max | 0.5 max |
| Na2O3% | 0.3max | 0.25max |
| A12O3 | 94.0min |
3 Ǻ. According to the industrial application specialties. We endueourproductswiththecharactersofhigheradsorption speed, stronger crushing and anticontaminativeresistance, more cyclic times and longer work-span. All these advantages have made it come to be the most essential and necessary desiccant in the fields of the deep drying, refinery, polymerization for cracked gases, ethylene, propylene and any other non-acidic gases or liquids in petroleum and chemical industrial.The pore size of 3A molecular sieve is 3Ǻ. It does not adsorb any molecular larger than
3 Ǻ. According to the industrial application specialties. We endueourproductswiththecharactersofhigheradsorption speed, stronger crushing and anticontaminativeresistance, more cyclic times and longer work-span. All these advantages have made it come to be the most essential and necessary desiccant in the fields of the deep drying, refinery, polymerization for cracked gases, ethylene, propylene and any other non-acidic gases or liquids in petroleum and chemical industrial.
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
|
[email protected] |
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 | |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 | |
|
[email protected] |
3 Ǻ. According to the industrial application specialties. We endueourproductswiththecharactersofhigheradsorption speed, stronger crushing and anticontaminativeresistance, more cyclic times and longer work-span. All these advantages have made it come to be the most essential and necessary desiccant in the fields of the deep drying, refinery, polymerization for cracked gases, ethylene, propylene and any other non-acidic gases or liquids in petroleum and chemical industrial.The pore size of 3A molecular sieve is 3Ǻ. It does not adsorb any molecular larger than
3 Ǻ. According to the industrial application specialties. We endueourproductswiththecharactersofhigheradsorption speed, stronger crushing and anticontaminativeresistance, more cyclic times and longer work-span. All these advantages have made it come to be the most essential and necessary desiccant in the fields of the deep drying, refinery, polymerization for cracked gases, ethylene, propylene and any other non-acidic gases or liquids in petroleum and chemical industrial.
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
|
[email protected] |
Remarks:
Alumina Catalyst manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Alumina Catalyst at a competitive price from us. We have ready stock of Alumina Catalyst in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates